FFit My Crate
Vehicle fit guide

Will this dog crate fit in my car?

Cargo volume cannot answer this question. You need the crate’s exterior dimensions and five measurements from the actual usable space.

The five measurements

  1. Opening width: the narrowest width the crate must pass through.
  2. Opening height: the lowest point under trim, latch or a sloping hatch.
  3. Cargo width: the narrowest usable width, often between wheel arches.
  4. Cargo depth: closed hatch to seatbacks at floor level.
  5. Interior height: the lowest roof height along the crate’s complete position.

Test both orientations

A crate may fail lengthwise but fit sideways. Rotate the exterior length and width in your comparison, but keep the crate’s maximum height unchanged. Confirm that the correct door remains usable after rotation.

Common reasons a crate does not fit

  • The hatch opening is lower than the cargo-area ceiling.
  • Handles add height beyond the crate body specification.
  • Wheel arches reduce usable width.
  • A sloped rear door removes depth above floor level.
  • Tie-down points, trim or a raised cargo floor reduce clearance.
Safety note: A geometric fit does not certify crash safety or restraint. Follow the crate and vehicle manufacturers’ installation and restraint instructions.

Compare all dimensions automatically

Enter a verified crate or your own exterior measurements and see the limiting dimension.

Check car fit →